HYTERA PD365UC UHF & DMR (HYTERA)

HYTERA PD365UC UHF & DMR
DMR portofoon in smartphone formaat (430-470 Mhz. )

Additional functions (selection)

Info HYTERA PD365UC UHF & DMR

DMR portofoon in smartphone formaat (430-470 Mhz. )

Additional functions (selection)

  • Selectable transmitting power: 1.5 W or 3 W
  • Analog signaling: CTCSS, CDCSS
  • Dust and water protection according to IP54
  • Shock and vibration resistance according to MIL-STD-810 C/D/E/F/G
  • DMR text messages with up to 64 characters
  • Four programmable keys
  • Charging and programming via Micro-USB interface
  • Scan function for analog and digital channels
  • Versatile voice calls: Individual call, group call and broadcast call on digital channels

Levering omvat:

  • Handheld radio
  • Lithium-ion battery (2000 mAh)
  • EU power supply unit for Micro-USB
  • Hand strap (Nylon)
  • Belt clip
  • Manual

General data

Frequency range

UHF: 400 - 440 MHz, 430 - 470 MHz

Supported operation modes

  • DMR Tier II (DMR conventional)
  • Analog

DMR Tier II in reference to ETSI TS 102 361-1/2/3

Channel capacity

256

Zone capacity

16

Channel spacing

12.5/25 kHz (analog)
25 kHz (digital)

Operating voltage

3.7 V

Battery

2000 mAh (Lithium-Ionen-Akku)

Battery service life (5/5/90)

approx. 10 h (analog)
approx. 12 h (digital)

Frequency stability

±0.5 ppm

Antenna impedance

50 O

Dimensions (H×W×D)
(with standard battery, without antenna)

123 × 55 × 23 mm (PD355)
106 × 54 × 23 mm (PD365)

Weight

approx. 160 g

Transmitter

Transmitting power

UHF: 1.5 / 3 W

Modulation

11 K0F3E at 12.5 kHz
16 K0F3E at 25 kHz

4FSK digital modulation

12.5 kHz (data only): 7K60FXD
12.5 kHz (voice & data): 7K60FXW

Interfering signals and harmonics

-36 dBm < 1 GHz
-30 dBm > 1 GHz

Modulation limiting

±2.5 kHz at 12.5 kHz
±5.0 kHz at 25 kHz

Noise suppression

40 dB at 12.5 kHz
45 dB at 25 kHz

Adjacent channel selectivity

60 dB at 12.5 kHz
70 dB at 25 kHz

Audio sensitivity

+1 dB to -3 dB

Nominal audio distortion

= 3%

Digital vocoder type

AMBE+2TM

Receiver

Sensitivity (analogue)

0.22 µV (12 dB SINAD)
0.22 µV (typical) (12 dB SINAD)
0.4 µV (20 dB SINAD)

Sensitivity (digital)

0.22 µV / BER 5%

Adjacent channel selectivity
TIA-603
ETSI


60 dB at 12.5 kHz / 70 dB at 25 kHz
60 dB at 12.5 kHz / 70 dB at 25 kHz

Intermodulation
TIA-603
ETSI


70 dB at 12.5/25 kHz
70 dB at 12.5/25 kHz

Spurious response rejection
TIA-603
ETSI


70 dB at 12,5/25 kHz
70 dB at 12.5/25 kHz

Spurious response rejection

40 dB at 12.5 kHz
45 dB at 25 kHz

Nominal audio power output

0.4 W

Nominal audio distortion

= 5 %

Audio sensitivity

+1 dB to -3 dB

Conducted spurious emission

< -57 dBm

Ambient data

Operating temperature range

-30 °C to +60 °C

Storage temperature range

-40 °C to +85 °C

ESD

IEC 61000-4-2 (level 4) 
±8 kV (contact discharge) ±15 kV (air discharge)

Protection against dust and moisture

IP54

Shock and vibration resistance

MIL-STD-810 C/D/E/F/G

Relative humidity

MIL-STD-810 C/D/E/F/G

0 sterren gebaseerd op 0 beoordelingen
Door het gebruiken van onze website, ga je akkoord met het gebruik van cookies om onze website te verbeteren. Dit bericht verbergen Meer over cookies »